Torque Converters for Forklift

Torque Converter for Forklifts - A torque converter in modern usage, is usually a fluid coupling that is used to transfer rotating power from a prime mover, like for instance an internal combustion engine or an electrical motor, to a rotating driven load. Like a basic fluid coupling, the torque converter takes the place of a mechanical clutch. This enables the load to be separated from the main power source. A torque converter can provide the equivalent of a reduction gear by being able to multiply torque whenever there is a considerable difference between output and input rotational speed.

The most popular kind of torque converter utilized in auto transmissions is the fluid coupling type. During the 1920s there was also the Constantinesco or also known as pendulum-based torque converter. There are different mechanical designs used for always variable transmissions that can multiply torque. Like for instance, the Variomatic is a kind which has expanding pulleys and a belt drive.

The 2 element drive fluid coupling is incapable of multiplying torque. Torque converters have an component known as a stator. This alters the drive's characteristics during occasions of high slippage and generates an increase in torque output.

There are a at least three rotating parts within a torque converter: the turbine, that drives the load, the impeller, which is mechanically driven by the prime mover and the stator, that is between the impeller and the turbine so that it could alter oil flow returning from the turbine to the impeller. Usually, the design of the torque converter dictates that the stator be prevented from rotating under any situation and this is where the term stator originates from. In reality, the stator is mounted on an overrunning clutch. This particular design stops the stator from counter rotating with respect to the prime mover while still enabling forward rotation.

In the three element design there have been changes that have been integrated periodically. Where there is higher than normal torque manipulation is considered necessary, alterations to the modifications have proven to be worthy. Usually, these alterations have taken the form of multiple stators and turbines. Every set has been designed to generate differing amounts of torque multiplication. Some instances comprise the Dynaflow which uses a five element converter so as to generate the wide range of torque multiplication required to propel a heavy vehicle.

Though it is not strictly a part of classic torque converter design, various automotive converters comprise a lock-up clutch so as to reduce heat and so as to improve cruising power transmission efficiency. The application of the clutch locks the impeller to the turbine. This causes all power transmission to be mechanical that eliminates losses related with fluid drive.

Click to Download the pdf

Forklift Parts

Telehandler Truss Booms

Truss Boom for Telehandlers - The telescopic handler or telehandler is a generally utilized machine in agricultural and industrial applications. This particular equipment is similar in look to a forklift and even functions in a similar way, even if telehandlers are much more like a crane than forklift. It has a telescopic boom which can extend forward and upward from...

More

---

Pinions for Forklift

Pinions for Forklift - The main pivot, referred to as the king pin, is found in the steering mechanism of a lift truck. The very first design was a steel pin which the movable steerable wheel was connected to the suspension. As it could freely revolve on a single axis, it restricted the levels of freedom of movement of the...

More

---

Attachments for Straight Boom Lift

Straight Boom Lift Attachments - Forklift accessories are really intended to increase the number of jobs which a forklift could perform. Usually, forklifts are made to carry loads and transfer them from one point to a different place. With the use of attachments, the lift truck could perform numerous varied jobs. Forklifts have forks that are powered by hydraulics so...

More

---

Parts for Diesel Forklifts

Diesel Forklift Part - For companies who must raise, unload or load heavy things in a warehouse or manufacturing facility, a lift truck is an invaluable tool. To move freight, transport stock, store supply or lift up workers, the forklift is an indispensable item to have at many jobsites. Managers usually find that a used or new forklift is a...

More

---

Differential for Forklifts

Forklift Differentials - A mechanical machine capable of transmitting rotation and torque via three shafts is called a differential. Sometimes but not always the differential will use gears and will operate in two ways: in vehicles, it receives one input and provides two outputs. The other way a differential works is to put together two inputs so as to create...

More

---

TCM Forklift Parts

TCM Forklift Parts - In the international industry of material handling, forklifts play a major role for transporting industrial goods. First innovated as industrial vehicles during the 1930s in the U.S., lift trucks gained recognition after World War II during the 1940s. Becoming an efficient and reliable means to material handling solutions, the need and practicality of these equipment spread...

More

---

Forklift Steer Axles

Steer Axle for Forklifts - The classification of an axle is a central shaft meant for rotating a gear or a wheel. Where wheeled vehicles are concerned, the axle itself may be attached to the wheels and turn with them. In this instance, bearings or bushings are provided at the mounting points where the axle is supported. Conversely, the axle...

More

---

Adjustable Boom

Adjustable Boom - An adjustable forklift boom is a really valuable piece of equipment intended for businesses which must transfer really heavy stuff all over. The lift truck itself is a really essential piece of equipment that is basically a small truck outfitted together with 2 prongs that are power operated on the front. These prongs can be slid underneath...

More

---